Select Page

Warehouse Safety Tips | Episode 312 | Glove Selection And Use

by | Feb 11, 2026 | 5S Methodology, Mighty Line, Podcasts, Safety, Warehouse Safety Tips | 0 comments

Glove Selection And Use

Glove Selection And Use

Today’s podcast will cover ‘Glove Selection And Use.’

You can find the show notes to each episode, links to the information mentioned on the podcast, the social media platforms we’re on, and anything else related to the podcast at WarehouseSafetyTips.com.

If you’re a seasoned Podcast Listener, this podcast will be different from most you listen to.  It’s based on the name, which implies Warehouse Safety Tips.  And since the people in that industry are busy, we know time is money, so each episode will be as short and to the point as possible.

And now that all that is out of the way, let’s get to the Podcast!

Glove Selection And Use

Why glove selection matters for hand safety

Today’s focus is on selecting and using hand safety gloves. Cuts, pinches, and caught-in hazards show up fast in a busy facility. A torn carton edge. A sharp banding strap. A pallet shift that grabs your finger. It only takes one slip.
Gloves help, but only when you choose the right pair and wear them correctly. The wrong glove can be a problem in its own right. Too loose and it snags. Too thin and it fails. Too bulky, and you lose grip. That’s when hands get hurt.

Common glove mistakes that lead to injuries

I’ve seen people grab the “closest pair” and call it good. That’s how you end up using light-duty gloves on a sharp task. Or wearing coated gloves while handling chemicals. Or keeping the same pair for weeks because “they still look fine.” Meanwhile, the fingertips are worn down, and the liner is ripped. You can’t see every weakness until it’s too late.

Glove selection and use you can trust

Here are a few tips to assist you with glove selection and use for hand safety:
  • Match the glove to the hazard. Cut-resistant gloves for blades and sharp edges. Chemical-resistant gloves for liquids. Heat gloves for hot parts. If you’re unsure, ask. Guessing doesn’t protect you.
  • Check gloves before every use. Look for holes, tears, thinning spots, and split seams. Flip them over. Check the fingertips. A glove with damage is a glove that won’t do its job.
  • Replace gloves when they’re compromised. Don’t “stretch” glove life. If the grip coating is worn, the liner is frayed, or the glove has been soaked in a chemical, replace it. No debate.
  • Take the gloves off safely. Peel them off so the dirty outside doesn’t come into contact with your skin. Keep used gloves out of break areas and off work surfaces. Contamination travels.
  • Know when not to wear gloves. Some rotating tools and moving equipment can grab a glove and pull your hand in. That’s a caught-in hazard. Follow your facility rules for tasks where bare hands and guards are the safer choice.
“As always, these are potential tips. Please be sure to follow the rules and regulations of your specific facility.”

Build better habits around gloves and hand safety

Hand safety glove selection isn’t a one-time choice. It’s a routine. Grab the right glove. Check it. Use it. Replace it. Simple. Consistent.
And stay alert to the task change. If you switch from box handling to chemical wipe-down, your gloves should change too. Your hands tell the story of your work. Let’s keep that story injury-free.
Thank you for being part of another episode of Warehouse Safety Tips.
Until we meet next time – have a great week, and STAY SAFE!

Before moving on, here’s a word from one of our sponsors.

If you’ve ever been to or worked in a warehouse, you know just how important safety is to management and staff.  It’s almost impossible to go 10 steps without seeing Safety Tape, Angles, Signs, and/or products.

These items show us how to be safe and avoid danger in the workplace.  And if you’re looking for the best products to make this happen, look no further than Mighty Line!

Mighty Line Floor Signs / Floor Markings offer the best industrial products!

Go to MightyLineTape.com/SafetyTips to request a Sample Pack of their incredible Safety Signs and Floor Markings.

What makes Mighty Line the superior choice in keeping your facility safe and productive?

  • Mighty Line Tape is the strongest floor tape on the market and has a beveled edge that increases durability for industrial brush scrubbers, forklifts, and heavy industrial wheel traffic.
  • Easy installation and removal thanks to Mighty Line’s peel-and-stick backing.  You can apply and reapply it during installation – and it leaves no sticky residue should you need to remove it.  This allows the ability to change workflow areas quickly and easily – and not have the downtime associated with painting or using floor markings that leave behind a mess when you remove them.
  • Mighty Line Tape is 7 times thicker than the average Safety Floor Tape.
  • Mighty Line’s Signs and Markings come in various shapes, colors, and sizes.  And if they don’t have what you’re looking for in stock – their Customize It Program allows you to create exactly what you’re looking for.
  • Mighty Line offers a Limited 3-Year Warranty on their Floor Signs and Markings.
  • And last but certainly not least – Mighty Line Products are Patented and PROUDLY Made in the USA!

We’re proud to have Mighty Line as THE Official Floor Sign / Floor Marking Company for the Warehouse Safety Tips Podcast and Site.

Again – Go to MightyLineTape.com/SafetyTips to request a Sample Pack of their incredible Safety Signs and Floor Markings.

If you visit WarehouseSafetyTips.com – you’ll find the Show Notes for this episode.

Thank you for listening to Warehouse Safety Tips – and have a SAFE day!

Like and follow us on these Social Platforms:

https://www.instagram.com/warehousesafetytipspodcast/

https://www.twitter.com/YourSafetyTips

https://www.facebook.com/warehousesafetytips

https://www.youtube.com/channel/UCsLgzQJRDrG9C-qYbtQfG3Q

https://www.mightylinetape.com/safetytips

Submit a Comment

Your email address will not be published. Required fields are marked *